Menu
Home
 US
Home | Shopping Cart | Login | Contact Us |
 
SLS - About SLS - Contact Us
ABOUT US   |   PRODUCTS   |   IP CORES   |   SERVICES   |   DOWNLOADS   |   TRAINING   |   LICENSING
Logic Analyzer
 Test and Measurement
 Logic Analyzer
 Logic Analyzer Plug-Ins
 Pattern Generator
 Development Boards
 Snap On Boards
You are here: Home> Products> Test and Measurement> Logic Analyzer
Logic Analyzer
                    
INTRODUCTION | FEATURES | APPLICATIONS
Introduction

A PC based logic analyzer, SLA2100 CDLogic, is a full featured high-performance tool with 36 channels and 100 MHz sampling frequency support for the troubleshooting and performance verification of digital circuits. The CDLogic is controlled with software that communicates via USB interface for capturing wide range of data simultaneously. It has multiple probes and it can capture and display digital signals at various voltage levels (3.3V, 5V or 7V) in bit, byte and word format.

The CDLogic software supports windows. This allows for more organized data display (with color coded data and increased screen size), intuitive user interface, and data management (file saving, loading, printing). The captured data is displayed in Waveform, List and Plug-in views.

Explore the CDLogic software features by downloading the CDLogic software from SLS Downloads.

Features

  • Sampling rate: 500 Hz ~ 100 MHz
  • Supports 36 Channels
  • Samples: 64K ~ 512K per channel
  • Protocol analysis facility for I²C and USB
  • Flexible trigger options (Channel and Bus)
  • Minimum sampling time (10ns)
  • Output displays 25% pre trigger 75% post trigger data
  • External high speed clock input (max. 100 MHz)
  • LED indicators
  • Includes high quality micro grippers
  • Four pairs of military grade Teflon wire cable assembly
  • Connects to computer's USB port
  • Small physical size
  • Runs on Windows 2000 and XP
  • Displays samples (data) in List and Waveform View
  • Displays bus data in Digital as well as Analog form
  • Easy to setup
  • Low power consumption
  • Facility to print waveforms
  • International language support
  • Command prompt facility and full screen mode support
  • Import/Export VCD (Value Change Dump) file and ASCII file
   
Applications

  Using CDLogic, one can debug and verify the following:
  • Microcontroller, Microprocessors
  • Digital Counters
  • State Machines
  • Buffers or memory circuits using SRAM, DRAM and FIFO etc
  • Buses
  • System on Chip (SoC), functions in FPGA, standard cell or ASIC
Related Products

 
Protocol Analysis plug-ins with CDLogic
    USB Plug-in
    I²C Plug-in
Digital Pattern Generator (36 Channel, 100 MHz)
Downloads

Footer
Privacy Policy | Site Map Copyright© 2008 System Level Solutions All Rights Reserved.