Menu
Home
 US
Home | Shopping Cart | Login | Contact Us |
 
SLS - About SLS - Contact Us
ABOUT US   |   PRODUCTS   |   IP CORES   |   SERVICES   |   DOWNLOADS   |   LICENSING
Logic Analyzer
 Communication
     USB 3.0 Device 
     USB 2.0 Device 
     USB 2.0 Host 
     USB 1.1 
     Ethernet MAC 10/100 
 Interface
     I2C Controller 
     I2C Master 
     I2C Slave 
     I2S Controller 
     AC’97 Controller 
 Display
     VGA/LCD Controller 
     Graphics LCD Controller 
     Touch Panel Controller 
 Memory
     SD Host Controller 
     Compact Flash Controller 
 Processor
     8051 Master 
 Legacy
     PS/2 Controller 
You are here: Home> IP Cores > Interface Cores >IPUSB20HR
USB 2.0 Device With Avalon Interface - UTMI Support
             
View Full size
INTRODUCTION | FEATURES | BENEFITS
Introduction

The USB 2.0 Device With Avalon Interface - UTMI Support (USB20HR) IP Core is an USB 2.0 compliant device core with 32-bit Avalon interface and UTMI interface support. The core supports 480 Mbit/s in High Speed (HS) mode, 12 Mbit/ s in Full Speed (FS) mode. The core can be pre-configured for 3 endpoints (CONTROL, BULK IN and BULK OUT). Extra endpoints upto 15 can be added as per the request at additional cost including Isochronous and Interrupt. There is one control endpoint that handles the setup, data, and status stages during control transfers.

It is provided as Altera Quartus II Megafunction (Altera SOPC Builder ready component) and integrates easily into any SOPC Builder generated system using Nios® II Avalon bus.


Do not have USB 2.0 UTMI interface on your Development Board? Click here for a System Level Solution!.
Features
  • Certified USB 2.0 device core
  • Supports both High Speed (480Mbps) and Full Speed (12Mbps)
  • Supports USB 2.0 Transceiver Macrocell Interface (UTMI)
  • Pre-Configured for 3 endpoints
    • CONTROL
    • BULK IN
    • BULK OUT
  • Extra endpoints upto 15 can be added as per the request at additional cost including Isochronous and Interrupt.
  • Software controlled USB enumeration
  • Optimized for use with Altera® Nios® II embedded processor Includes HAL Driver for NIOS-II
  • Avalon System Interconnect FabricTM Compliant
  • Optimized LE count
Example LE Usage
IP Core Supported Families Interface LEs Performance (fmax) Memory Bits
  Cyclone II
UTMI
2421
120.12 MHz
18432
USB20HR Cyclone III
UTMI
2406
100.37 MHz
18432
  Stratix II
UTMI
2070
161.97 MHz
18432
Please Note: The numbers can change upon core revision. Please contact support@slscorp.com for latest figures
Verification
  • USB20HR IP core's functionality is verified in ModelSim simulation software using test bench written in Verilog HDL
Benefits
  •  Complete solution comprising of core, software and board for easy and quick implementation
  •  Reduced risk with proven, compliant technology
  •  Premier direct support from SLS IP designers
  •  Low system and license cost
  •  Software drivers included
  •  Ready to use peripheral for Nios® II applications
Deliverables (Full version)
  • Encrypted core
  • Pre-Configured for 3 endpoints
  • Software Driver and application
  • USB 2.0 HAL Driver Object Code
  • Extensive documentation
  • 1 year Opencore License (Contact Us for details.)
Actual Performance Data
Application Example : MASS STORAGE     ( View Full size )
<< Back to USB 2.0 Go to USB20HF >>
* Contact support@slscorp.com for details on support
Footer
Privacy Policy | Site Map Copyright© 2010 System Level Solutions All Rights Reserved.