You are here: Home > Products > SantaCruz Snap On Boards
SantaCruz Snap On Boards
The SantaCruz interface Snap On boards are designed to provide
additional interface to the base boards having SantaCruz connector.
Looking for a daughter card for SantaCruz expansion? You have reached
the right place!
USB 2.0 UTMI
The SLS USB2.0 Snap On board is designed to
provide connectivity between USB2.0 host controller
(computer) and UTMI compliant USB2.0 Function
IP Core. The USB Snap On board provides extra
signals, which may be used to snoop some Santa
Cruz headers.
The SCUSB20UL - USB 2.0 On-The-Go Snap On Board is designed to provide connectivity between USB 2.0 host controller (computer) and USB 2.0 function IP core.
The SLS USB1.1 Snap On board is designed to
provide connectivity between USB1.1 host controller
(computer) and UTMI compliant USB1.1 Function
IP Core. The USB1.1 Snap On board provides
extra signals, which may be used to snoop
some Santa Cruz headers.
Altera ASI_SDI SC card is an optional daughter
card which plugs into santa cruz connector
of Altera development kits. The daughter card
features a cyclone II device (EP2C5T144C6)
and along with the NIOS II CycloneI/II development
kit can be used to demonstrate digital video
broadcast asynchronous serial interface (DVB-ASI)
and serial digital interface (SDI) solutions.
The Stackable Stepper Motor Snap On Board
is designed to provide the stepper motor interface
(isolated) to the development boards having
Santa Cruz short expansion headers.
The SLS Traffic Light Controller (TLC) is
an extremely useful tool for teaching HDL
coding for State Machines.
Moreover, one can also write different kinds
of LED blinking programs and sharpen the HDL
skills.
The SLS Ethernet Snap On board is designed
to provide connectivity between Ethernet MAC
layer & Physical layer (Ethernet cable).
The board comes with status LEDs to indicate
speed and duplex condition. The Ethernet Snap
On board provides extra signals, which may
be used to snoop some Santa Cruz headers.
Snap on boards or daughter cards made for
Altera standard Santa Cruz header can now
fit easily on DE2 and DE1 board. DE2 and DE1
come with two 40 pin expansion headers for
increasing the IOs and board expansion capabilities.
The SLS ADC-DAC snap on board is designed
to provide the Analog (In and Out) interface
to the development boards having Santa Cruz
short expansion headers. The Snap On board
provides 8-channel 8-bit analog input interface
(Analog-to-Digital converter) and 1-channel
8 bit analog output interface (Digital-to-Analog
converter).
The LED Matrix Board is designed to provide an external display interface to the development boards having SantaCruz expansion headers. It extends the Embedded system with a display interface for scrolling message display as well as to test the design outputs using 168 user definable LEDs.
The IR Snap On Board is especially designed to provide IR
interface for any development oard having Santa Cruz Header.
The board is delivered with the IR keyboard to start the experiment.
The board contains four IR sensors (TSOP1738), Seven Segment Display,
and 2-way DIP Switch.
US
