Snap On Boards

USB 2.0 UTMI

The SLS USB2.0 Snap On board is designed to provide connectivity between USB2.0 host controller (computer) and UTMI compliant USB2.0 Function IP Core. The USB Snap On board provides extra signals, which may be used to snoop some Santa Cruz headers.

USB 2.0 ULPI/OTG

The SCUSB20UL - USB 2.0 On-The-Go Snap On Board is designed to provide connectivity between USB 2.0 host controller (computer) and USB 2.0 function IP core.

USB 1.1 (Fairchild USB1T11A PHY)

The SLS USB1.1 Snap On board is designed to provide connectivity between USB1.1 host controller (computer) and UTMI compliant USB1.1 Function IP Core. The USB1.1 Snap On board provides extra signals, which may be used to snoop some Santa Cruz headers.

ASI/SDI

Altera ASI_SDI SC card is an optional daughter card which plugs into santa cruz connector of Altera development kits. The daughter card features a cyclone II device (EP2C5T144C6) and along with the NIOS II CycloneI/II development kit can be used to demonstrate digital video broadcast asynchronous serial interface (DVB-ASI) and serial digital interface (SDI) solutions.

Stackable Stepper Motor

The Stackable Stepper Motor Snap On Board is designed to provide the stepper motor interface (isolated) to the development boards having Santa Cruz short expansion headers.

Traffic Light Contoller

The SLS Traffic Light Controller (TLC) is an extremely useful tool for teaching HDL coding for State Machines.
Moreover, one can also write different kinds of LED blinking programs and sharpen the HDL skills.

Ethernet

The SLS Ethernet Snap On board is designed to provide connectivity between Ethernet MAC layer & Physical layer (Ethernet cable). The board comes with status LEDs to indicate speed and duplex condition. The Ethernet Snap On board provides extra signals, which may be used to snoop some Santa Cruz headers.

E-Gasket

Snap on boards or daughter cards made for Altera standard Santa Cruz header can now fit easily on DE2 and DE1 board. DE2 and DE1 come with two 40 pin expansion headers for increasing the IOs and board expansion capabilities.

HSMC E-Gasket

HSMC E-Gasket is High-Speed Mezzanine Connector to Altera Standard Santa Cruz header converter. The product is available now.

HSMC to AMC Carrier

HSMC to AMC Carrier board is HSMC (High-Speed Mezzanine Connector) to AMC (AdvancedMC) convertor allowing interface to boards using standards such as PCI Express, Advanced Switching (AS), Serial RapidIO (SRIO) and Gigabit Ethernet. The board follows PICMG AMC.0 R2.0 requirements.

HSMC to AMC Module

HSMC to AMC Module board is HSMC (High-Speed Mezzanine Connector) to AMC (AdvancedMC) module, that when used with appropriate carrier allows the interface to boards using standards such as PCI Express, Advanced Switching (AS), Serial RapidIO (SRIO) and Gigabit Ethernet. The board follows PICMG AMC.0 R2.0 requirements.

Data Conversion HSMC

The Data Conversion HSMC (High Speed Mezzanine Card) is now available and can be used for developing DSP applications with Altera Development boards that feature the High Speed Mezzanine Card (HSMC) connector. The Data Conversion HSMC is created to provide a set of Analog to Digital and Digital to Analog interfaces including an Audio Codec interface.

ONFI 2.0 HSMC

The ONFI 2.0 HSMC ( High Speed Mezzanine Card) is designed to develop NAND Flash based applications with Development boards having the High Speed Mezzanine Card (HSMC) connector. The board provides connectivity to eight 16Gb NAND Flash devices and one High Speed Transceiver Transmit and Receive channel via SMA connectors.

Audio Codec

The SLS Audio Codec Snap On board provides a digital audio interface for all FPGA Development boards having Altera standard Santa Cruz connector.

ADC-DAC

The SLS ADC-DAC snap on board is designed to provide the Analog (In and Out) interface to the development boards having Santa Cruz short expansion headers. The Snap On board provides 8-channel 8-bit analog input interface (Analog-to-Digital converter) and 1-channel 8 bit analog output interface (Digital-to-Analog converter).

LED Matrix

The LED Matrix Board is designed to provide an external display interface to the development boards having SantaCruz expansion headers. It extends the Embedded system with a display interface for scrolling message display as well as to test the design outputs using 168 user definable LEDs.

IR With Keyboard

The IR Snap On Board is especially designed to provide IR interface for any development oard having Santa Cruz Header. The board is delivered with the IR keyboard to start the experiment. The board contains four IR sensors (TSOP1738), Seven Segment Display, and 2-way DIP Switch.